Heating and air conditioning

Heat pumps – a clean, efficient way to heat and cool your house 

Planning to install air conditioning, remodel, have an old furnace or just want to switch from methane gas? If so, consider a heat pump heating, ventilation and air conditioning (HVAC) system: it provides both heating and cooling. Heat pumps are clean, safe, and all-electric. Peninsula Clean Energy offers a $2,500 rebate to help customers make the switch to a heat pump HVAC system.

Heat pump condenser evaporator unit
Heat pump condenser evaporator unit

Get a 0% interest loan up to $10,000 with no credit check for a heat pump HVAC system through our Zero Percent Loan program

  • A qualified contractor can evaluate your home and help you choose system type, model selection, location, and other factors related to the ease and cost of installation
  • Heat pump HVAC can be integrated with your central air system; there are also ductless models for rooms that do not have central air ducts
  • Our rebates help offset the cost of heat pump systems and are also available for upgrades to your electric panel, if needed 
  • We also offer zero percent interest loans for heat pump HVAC

Methane gas leaks and combustion of methane contribute to climate change and are unhealthy and potentially hazardous in the home. Heat pumps have been around for decades – refrigerators and window air conditioners both use heat pumps.

  • Efficient: Heat pump HVAC designs for the home provide heat for less than 1/3 the energy used by a gas furnace, and also keep you cool in the summer
  • Safe: Heat pumps are all-electric – no gas combustion emissions or hazards 
  • Clean: Heat pumps powered by Peninsula Clean Energy are 100% clean

Peninsula Clean Energy rebates make it easier for residents in its member communities to transition to a clean energy home. The following table outlines all of Peninsula Clean Energy home appliance rebates. Please read the terms & conditions for full eligibility details and program requirements.

Upgrade TypeRebate Amount
Heat pump HVAC
Replace gas heater/furnace$2,500
Heat pump water heater
Replace gas water heater$2,000
Replace electric resistance water heater$500
Additional rebate add-ons
Electrical panel upgrade$1,000
CARE/FERA customer$1,000

Additional rebates
Other regional, state, and federal programs offer incentives to help your transition to a clean energy home. We recommend using the Switch is On incentive finder tool for information about other rebates available to you.

  • Be a resident of San Mateo County or the City of Los Banos 
  • Own the residence where upgrades are installed  

Please read the terms & conditions for full eligibility details and program requirements. Section 4.2 specifies the heat pump HVAC eligibility requirements.

Please note that this applies to our rebates only. If you are also applying for our 0% loan, there are additional requirements and steps. Visit our Zero Percent Loan program to learn more.

  1. Plan your project: review our program guidelines and find a contractor. You may work with any contractor you'd like. If you need assistance finding a contractor, refer to our list of loan program approved contractors here.
  2. Install your equipment and retire your old gas equipment. Make sure to get a building permit for your project from your city.
  3. Apply for your rebate: you will be asked to provide photos of your new equipment and capped gas line to the old gas equipment, proof of project costs such as a contractor invoice, and copy of the city permit.
  4. Receive rebate: once the application is approved, we will mail you or your contractor the rebate check, whichever is identified as the rebate recipient in the application. We will only mail the rebate to your contractor if they applied on your behalf and provide proof that the rebate was fully passed down to you as a discount.

To be eligible for the rebate, you must own the property in San Mateo County or Los Banos where the heat pump HVAC is being installed. Only heat pump HVAC systems installed after October 1, 2022 qualify for the rebate. Below is the heat pump HVAC eligibility guidelines as stated in our rebate program terms & conditions:

  • Must replace a gas, propane, oil, or wood stove heater/furnace. Electric heaters replacements and new construction projects do not qualify.
  • Proof of old heater/furnace decommissioning is required. This can include a before and after photo demonstrating removal of the old equipment or photo of the capped fuel line at location where decommissioned equipment was or is.
  • All fully-electric heat pump HVAC systems qualify, regardless of types and configuration (packaged/split, ducted/ductless, single/multi-zoned), amperage, tonnage, or efficiency rating. Duel-fuel systems with gas heat as backup do not qualify.
  • One rebate per heat pump condensing unit (or packaged unit) installed. Limited to two HP HVAC rebates per electric account.

To be eligible for the electrical panel upgrade rebate, you must own the property in San Mateo County or Los Banos where the panel is being upgraded, and the panel upgrade must take place within 6 months of the heat pump water heater or heat pump HVAC installation. Below is the electrical panel eligibility guidelines as stated in our rebate program terms & conditions:

  • Main electrical panel upgrades qualify. This includes installing a new panel with the same amperage or increasing the electrical service to the residence and installing a new panel with increased amperage. Main electrical panel amperage must be 200 amps or less to qualify.
  • Electrical subpanel upgrades or electrical subpanel additions qualify.
  • Electrical work not involving a main panel or subpanel upgrade/addition, such as running a new circuit from the existing panel, do not qualify for the rebate.
  • The electrical panel upgrade must take place within 6 months of the HPWH or HP HVAC installation to qualify. This rebate is a bonus rebate, not a standalone rebate, and therefore cannot be applied for on its own. Apply for this rebate at the same time as a HPWH and/or HP HVAC application.
  • Limited to one panel upgrade rebate per electric account.

The following documents are required:

  • Itemized contractor invoice(s)
    • Invoice must show the name and total cost of the heat pump HVAC upgrade. If invoice is combined with other work, name of each upgrade and cost must be itemized. If your project was self-installed/“DIY,” receipts for the equipment and any materials used in the installation may be submitted instead.
  • Photos of heat pump HVAC system and electrical panel, if applicable:
    • One photo of the outdoor unit (condenser), one of indoor unit (air handler or evaporator), and photo of the condenser nameplate (i.e. sticker with specifications).
    • One photo of the inside of the new panel installed, if panel was upgraded.
  • Photo proof of previous gas heater/furnace removal and/or decommissioning, either:
    • Photo of capped gas line to the gas heater/furnace, or
    • Before and after photos demonstrating removal of old gas heater/furnace.
  • Copy of city permit(s) for heat pump HVAC and electrical panel upgrade, if applicable:
    • Permit must show the name of each upgrade that took place.
    • If the permit is for a large remodel and does not specifically state the heat pump water heater or electrical panel upgrade, additional city permit documentation is needed to demonstrate that these upgrades were part of the work completed.

You can use any contractor you’d like. In fact, self-installed/“DIY” projects are also eligible for the rebate. However, please note that you to get our Zero Percent Loan, you do have to use a loan program approved contractor.

Yes, self-installed / “do it yourself” heat pump water heater projects qualify for the rebates. Please note self-installed projects are still required to provide copy of the city permit.

You are not required to use the same contractor for the heat pump HVAC installation and electrical panel upgrade.

Both are allowed – you can apply yourself or the contractor can do it on your behalf. The application will ask who is filling out the application. Make sure to talk to your contractor about who will be submitting the application so that you do not submit duplicate applications. Duplicate applications will lead to longer processing times.

The rebate goes to the customer by default unless the contractor is identified as the rebate payee in the application. The rebate may only go to your contractor if it fully passed down as a discount to you and clearly itemized in their invoice.

Unfortunately, we do not offer rebate reservations at this time.

The average time to receive the rebate from the time of application is 4-6 weeks. Applications submitted through BayREN generally take about a week longer than applications submitted directly to us. You will receive an email from us when you rebate application is approved; from that point, you can expect the check in 2 weeks.

Unfortunately, they do not qualify. Rebates are only available for replacement/retrofit projects where the heat pump HVAC system installed is replacing a gas or other fossil-fuel powered heater/furnace.

You do not have to be the PG&E account holder to qualify for the rebate. However, you must be the property owner. If the application is not under the PG&E account holder’s name, we will reach out to request additional documentation that proves you are the property owner and/or reside at the property.

Yes, rental properties qualify for the rebate as long as the rebate applicant is the property owner.

Unfortunately, only systems installed on or after October 1, 2022 are eligible for the rebate. 

Yes, we offer up to two heat pump HVAC rebates per electric account; one per heat pump installed (one heat pump being defined as one condensing unit or packaged unit).

Unfortunately, you must decommission your existing gas heater/furnace (e.g. take out gas equipment or cap gas line) to be eligible for the rebate. 

It depends. The electrical panel upgrade must take place within 6 months of the heat pump water heater or heat pump HVAC installation to qualify. This rebate is a bonus rebate, not a standalone rebate, and therefore cannot be applied for on its own. The rebate must be applied for at the same time as a heat pump water heater or heat pump HVAC rebate.

This rebate is a bonus rebate, not a standalone rebate, and therefore cannot be applied for on its own. The rebate must be applied for at the same time as a HPWH or heat pump HVAC rebate. If you are using a different contractor for your electrical panel upgrade and the HPWH contractor is the one applying for you, you should provide with them with these three things: 1) copy of permit for electrical work, 2) photo of the inside of the panel, and 3) invoice for your contractor/electrician for the panel upgrade. Your contractor will submit these documents for you along with the HPWH application.

If you are applying yourself, you can submit all the documents for the HPWH and electrical panel upgrade in that single application.

The program does not have an end date and is available until funding is depleted. Rebates are available on a first-come, first-served basis based on the application submittal date. It is likely for the rebates to continue through 2024 and future years, though the rebate levels are subject to change.

Peninsula Clean Energy has rebates for heat pump water heaters, see more details here. You may also qualify for our zero interest loan program – see Zero Percent Loans