Ultra-wideband (UWB) communication and ranging

Ultra-wideband (UWB) testing

Ultra-wideband (UWB) communication and ranging

Rohde & Schwarz test solutions enable accurate test and verification of UWB devices in all phases of the product lifecycle

Ultra-wideband communication, as standardized by IEEE 802.15.4 (groups a/f/z), enables very low power communication and very accurate ranging in the license-exempt spectrum. Based on distinct applications in several industries, the technology is now entering the consumer market, mainly targeting mobile phone and automotive applications. Typical use cases are keyless entries, asset finding, mobile data sharing and secure payment.

A wideband technology for fine ranging

Pulse radio communication goes back to the early days of radio communications, based on inventions from Heinrich Hertz and Guglielmo Marconi. UWB is characterized by the transmission of extremely narrow pulses, with a duration of few nanoseconds, resulting in quite a wide spectrum of 500 MHz and more. This makes UWB signals relatively resistant to interferences and allows very accurate time of flight measurements.

The IEEE 802.15.4 standard defines two physical layers. One layer is for low pulse repetition frequencies (LRP UWB) of 1 MHz to 4 MHz. The other layer, mainly used in today’s applications, works with high pulse repetition frequencies (HRP UWB) ranging from 4 MHz to 250 MHz. The majority of applications using the defined high band channels in the range of 6 GHz to 10 GHz with a channel bandwidth of 499.2 MHz.

Ensuring secure communication and accurate ranging

For the testing of UWB devices besides regulatory requirements, the performance and interoperability aspects and requirements as addressed by the FiRa consortium, the UWB alliance or the Car Connectivity Consortium are of utmost importance.

In general, the design, integration and testing of wideband radio devices at very low power require test solutions able to generate and analyze very wide signals and have the required dynamic range. A special aspect is the verification and calibration of the components used for time of flight measurements, requiring a test setup that allows very accurate time measurements. Rohde & Schwarz will help you establish which test solution you need to bring your application to market with the desired quality and performance.

UWB channel allocation based on IEEE 802.15.4z (Draft 0.8, March 2020)

Impulse radio ultra-wideband (UWB) standardization in IEEE 802.15.4 (groups a, f, z)

Transmitter measurements with the R&S®CMP200 radio communication tester

Benefits of Rohde & Schwarz UWB test solutions

  • Test solutions for every purpose – from R&D to production and certification
  • Dedicated UWB solutions developed together with the main players of the ecosystem
  • Test solutions for conformance and compliance testing

Related resources

Video: UWB R&D, FiRa certifictaion and production testing

Watch this video to learn more about powerful tools to solve UWB test challenges in R&D, for FiRa certification and in mass production

More information

Webinar: Realizing the full potential of UWB with smart testing

In this webinar we explain the latest trends in the UWB market, including upcoming test and certification requirements.

More information

Video: Ultra-wideband performance testing over the air for R&D

Watch this video to learn about our fully automated test solution that enables design engineers to quickly test and compare various device designs to achieve the most accurate UWB localization.

Watch Video

Poster: UWB for enhanced ranging devices

Download this free poster for an overview of all the important details of the physical layer and positioning techniques for ultra-wideband.

More information

Application Card: Accurately measure your UWB device's time of flight

Read this application card to learn about how the R&S®CMP200 radio communication tester together with the R&S®CM-Z300A time of flight kit provides an accurate setup for time of flight measurements – in validation, calibration and certification.

More information

Application Card: Simplify FiRa™ certification for your UWB device

Read this application card to learn about how the validated UWB PHY test suite for the R&S®CMP200 radio communication tester simplifies FiRa™ Consortium PHY conformance testing.

More information

Webinar: Reinforce a seamless UWB experience by certification and over-the-air testing

In this webinar, we will provide you with an update on UWB technology and ecosystem trends. We will also introduce a physical layer conformance test tool from Rohde & Schwarz.

More information

White paper: High rate pulse ultra-wideband physical layer testing and certification

Read this white paper to get an overview of UWB physical layer fundamentals, the associated test requirements and appropriate test solutions.

More information

Webinar: Discover the secrets of UWB based on IEEE 802.15.4z

In this webinar, we give you the latest updates on the evolution of the UWB standard for secure communication and ranging, as specified in IEEE 802.15.4z.

More information

Application note: HRP UWB testing with CMP200 radio communication tester

This application note describes how to use the UWB measurement functionality provided by R&S®CMP200 radio communication tester to perform HRP UWB PHY measurements for R&D and production purposes.

More information

R&S®CMP200 – fine-tuned for ultra-wideband

Video

R&S®CMP200 – fine-tuned for ultra-wideband

Related products

R&S®CMP200 radio communication tester

The integrated non-signaling solution for UWB and 5G mmWave RF parametric testing in R&D and production.

Product information

R&S®SMW200A vector signal generator

The fine art of signal generation supporting UWB modulation schemes at full bandwidth.

Product information

R&S®FSW signal and spectrum analyzer

Setting standards in innovation and usability for testing wireless standards, including pulse analysis.

Product information

R&S®VSE vector signal explorer software

Provides UWB signal analysis on your PC or in the cloud (Cloud4Testing).

Product information

R&S®RTP oscilloscopes

The combination of high-class signal integrity with a fast acquisition rate allows analysis of UWB signals together with the VSE software.

Product information

Subscribe
Subscribe to the wireless communications testing newsletter

Stay up to date with the latest news on 5G, 6G and Wi-Fi as well as mobile device and infrastructure equipment testing - and more